Soften Earth and Stone

Transmutation [Earth]
Level: Earth 2
Components: V, S
Casting Time: 1 standard action
Range: Close (25 ft. + 5 ft./2 levels)
Area: Three 10-ft. squares; see text
Duration: Instantaneous
Saving Throw: None; see text
Spell Resistance: No
Spell Points: 3

There is no more literal way to control the battlefield than to melt it beneath the opponents’ feet.

When this spell is cast, all natural, undressed earth or stone in the spell’s area is softened. Wet earth becomes thick mud, dry earth becomes loose sand or dirt, and stone becomes soft clay that is easily molded or chopped. You affect the area to a depth of 2 feet. The affected 10-ft. squares need not be contiguous. Magical, enchanted, dressed, or worked stone cannot be affected. Earth or stone creatures are not affected.

A creature in mud must succeed on a Reflex save or be caught for 1d2 rounds and unable to move, attack, or cast spells. A creature that succeeds on its save can move through the mud at half speed, and it can’t run or charge.

Loose dirt is not as troublesome as mud, but all creatures in the area can move at only half their normal speed and can’t run or charge over the surface.

Stone softened into clay does not hinder movement, but it does allow characters to cut, shape, or excavate areas they may not have been able to affect before.

While soften earth and stone does not affect dressed or worked stone, cavern ceilings or vertical surfaces such as cliff faces can be affected. Usually, this causes a moderate collapse or landslide as the loosened material peels away from the face of the wall or roof and falls.

A moderate amount of structural damage can be dealt to a manufactured structure by softening the ground beneath it, causing it to settle. However, most well-built structures will only be damaged by this spell, not destroyed.

Augment: For every additional spell point you spend, you can affect an additional 10’ square within range.